A fast curing, strong and flexible cold weld epoxy

PC-AutoBond™

paste epoxy

SKU:081112

£8.90 GBP

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size 1oz

Quantity

PC-AutoBond™ is a fast curing, strong and flexible cold weld Epoxy formulation.

Product can be applied using a mixing nozzle or mixing stick. PC-AutoBond™ is an extremely flexible epoxy with exceptional tensile adhesion and peel strength to a wide variety of substrates. In just a few minutes PC-AutoBond™ forms a tough bond without the need for clamping. Product exhibits superior shatter, impact or vibration stability and resistance.

Added flexibility creates high strength, permanent bond.

WORKING TIME: approx. 8 MINUTES
CURE TIME: 1 HOUR (12-24 hours for full cure)

View full details

Properties
Metallic grey colour
Quick-setting
No drip or sag
Waterproof
Sandable and paintable
Use on
All metals, rubber, fibreglass, fabrics, concrete, glass, some plastics and more.
YES to PVC, polycarbonate, acrylic and ABS.
NO to polyethylene or polypropylene.
Example projects
Attach foam rubber door seal
Use static mix nozzle to seal wires through holes in machine walls
Attach metal plaques to stainless steel
Seal cracks in plate metal

How to use PC-AutoBond™

Prep

Prepare your surface as best you can to ensure the best possible bond with PC-AutoBond™. Remove contaminants such as dust, dirt, oil and grime with a solvent such as methylated spirit, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. Mild detergent solution in water is also good for removing contaminants.

Use a clean paper towel or rag for wiping. Do not use white spirit or paint thinner for removing contaminants.

Remove rust and loose paint with sandpaper or wire brush. Epoxy typically sticks to most paints. If there’s a concern of the paint’s adhesion then remove it with sandpaper or wire brush.

Smooth, glossy and shiny surfaces should be roughened using sandpaper to increase adhesion.

Mixing

PC-AutoBond™ has a work time of 8 minutes so only mix as much product as you think you can apply in this time. You will be able to apply more to continue filling across an area, PC-AutoBond™ sticks to PC-AutoBond™.

PC-AutoBond™ is a non-drip paste.

PC-AutoBond™ is supplied with a mixing nozzle. Simply attached and dispense.

To mix manually, you can use the supplied mixing stick. You’ll probably a piece of scrap wood, cardboard or similar to mix on. The syringe will dispense equal amounts of both parts and you simply need to mix them together until the epoxy is a uniform colour.

The syringe lid can be replaced after use to save the remainder for future repairs. If it lost you can use aluminium foil. Store in a cool location.

Tinting

Underwater & Wet Use

Clean Up

After using PC- AutoBond™ clean up using methylated spirit, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner to clean tools and mixing surfaces before PC- AutoBond™ cures.

Clean hands and skin with soap and water.

Cured epoxy can be removed by applying paint remover or paint stripper to soften the epoxy surface. Scratch off the softened epoxy. Repeat as needed.

Finishing

After PC- AutoBond™ has cured it can be sanded and painted. We recommend allowing 1 hour to cure at 20°c (longer at cooler temperatures). PC- AutoBond™ will be reach functional strength in 30 minutes and should reach full hardness in 12-24 hours.

We recommend applying a stain-sealing primer/sealer to the repair before painting.

Downloads

Product Comparison Chart

Not sure which PC epoxy is right for your project? Take a look at our product chart for a quick comparison of some the key features of each our epoxies.

	HEAVY				CLEAR		PUTTY				WOOD

	PC-7®	PC-11®	PC-Auto Bond™	PC-Super Epoxy®	PC-Clear™	Tite-Chairs®	PC-Metal™	PC-Marine™	PC-Plumbing®	PC-Fahrenheit™	PC-Woody®	PC-Petrifier®	PC-Rot Terminator™
Waterproof after cure	✔	✔	✔	✔	✔		✔	✔	✔	✔	✔	Limited	✔
Apply to wet surface		✔	✔	✔	✔			✔	✔
Tintable		✔		✔	✔						✔
No drip or sag	✔	✔	✔	✔			✔	✔	✔	✔	✔
NSF® rated							✔		✔
Fill characteristics	★★★★	★★★	★★★	★★			★★	★★	★★	★★	★★★		★
Strength	★★★	★★★	★★★	★★★★	★★★	★★★★	★★	★★	★★	★★	★★	★★	★★★
Work time @ 21°c	1 HR	35 MIN	8 MIN	15 MIN	4 MIN	1-5 MIN	3 MIN	20 MIN	3 MIN	8 MIN	30-40 MIN		1-4 HR
Service time @ 21°c	12-24 HR	8-15 HR	1 HR	3-4 HR	1 HR	15-30 MIN	1 HR	1HR	1HR	1HR	12-24 HR	24 HR	3-7 DAY
Heat range	-30°c to 90°c	-30°c to 90°c	-30°c to 150°c	-30°c to 90°c	-30°c to 90°c	-55°c to 85°c	-30°c to 120°c	-30°c to 120°c	-30°c to 120°c	-30°c to 260°c	-30°c to 90°c	0°c +	-30°c to 90°c
Tensile strength	2150 PSI	1710 PSI	1700 PSI	2650 PSI	2300 PSI	4000 PSI	900 PSI	700 PSI	900 PSI	700 PSI	850 PSI
Colour	Dark grey	Off white	Metallic grey	Translucent	Clear	Clear	Dark grey	White	Grey	Brown	Tan	Milky white	Amber